Monthly Archives: April 2020

Semi-automatic monoblock for big format

Semi-automatic monoblock for big format

Semi-automatic monoblock TR2010-M2 for bottling wine in bottles big format.

STANDARD FEATURES

  • Wheeled
  • 2 valves filler for gravity filling system
  • Pneumatic lifting of the bottles
  • Mechanical corker for still wine corks with push button operation
  • Manual distribution of the corks directly into the closing head
  • Electric panel equipped with commands and protections according with EC norms

TECHNICAL DATA

  • productivity 100 bottles / hour
  • bottles 3-6-9 l
  • corks Ø Ø 30-36 mm, h 45-50 mm
  • dimension of Monoblock 130 x 70 x 220 cm, weight kg 550
Formular cerere ofertă

    Cable tray

    Cable tray

    PAT DE CABLURI confecționat din oțel inoxidabil diferite dimensiuni.

    Formular cerere ofertă

      HOSES FOR FOOD INDUSTRY

      HOSES FOR FOOD INDUSTRY

      Formular cerere ofertă

        Manholes

        Manholes

         

        Formular cerere ofertă

          Stainless steel VALVES

          Stainless steel VALVES

          Formular cerere ofertă

            STAINLESS STEEL FITTINGS

            STAINLESS STEEL FITTINGS

             

            Formular cerere ofertă

              STAINLESS STEEL ARMATURES

              STAINLESS STEEL ARMATURES

               

              Formular cerere ofertă

                PIPE-TABLE-BAR-PLATBAND
                of stainless steel

                PIPE-TABLE-BAR-PLATBAND
                of stainless steel

                 

                Formular cerere ofertă

                  Centrifugal pumps

                  Centrifugal pumps

                  SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH HYDRAULICS IN AISI 304 CD series made by EBARA, are surface centrifugal electric pumps entirely made of AISI 304 stainless steel. CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general. The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

                  Type Power    kW Flow rate m3/h Total head m
                  CD 70/05 0.37 4.8 15.9
                  CD 90/10 0.75 5.4 22.3
                  CD 120/12 0.90 6.6 24.3
                  CD 200/20 1.50 7.8 28.9
                  Formular cerere ofertă

                    Impeller pumps

                    Impeller pumps

                    The pumps with food rubber rotor, model T brand Enoveneta, are made entirely of stainless steel AISI 304 and are available with a flow rate of 80 to 300 hectoliters per hour.

                    All models are equipped with a rubber rotor (impeller), by-pass and reverse control electric control panel.

                    STANDARD FEATURES:
                    AISI 304 stainless steel cage stand
                    AISI 304 stainless steel pump body
                    Food-safe rubber impeller
                    By-pass
                    Single speed electric motor (T40)
                    Two-speed electric motor (T60, T80)
                    400/3/50 control panel with reverse feature

                    OPTIONALS:
                    Mechanical speed variator (T60)
                    Electronic speed variator
                    Liters counter
                    Remote radio control
                    Remote cable control
                    Liquid detection probe

                     

                    TECHNICAL DATA T40 T60 T80
                    Installed power kW 1.1 1.5/2.2 2.2/3.0
                    Hourly output Hl/h 80 100/190 170/300
                    Min/max head m 20/25 20/25 20/25
                    Rotations per minute rpm 900 380/760 380/760
                    Fittings DIN 40 65 80
                    TECHNICAL DATA T40 convertizor T60 convertizor T80 convertizor T100 convertizor
                    Installed power kW 1.1 2.2 3.0 4.0
                    Hourly output Hl/h 25/80 60/190 110/300 60/500
                    Min/max head m 20/25 20/25 20/25 20/25
                    Rotations per minute rpm 180/900 150/760 150/760 150/760
                    Fittings DIN 40 65 80 100
                    Formular cerere ofertă

                      Transfer pumps

                      Transfer pumps

                      Self-priming transfer pumps, but in order to obtain an appropriate long-term functionality, it is recommended that they be primed at each use, placing the liquid to be transferred in the pump head

                      Intended for transfer of food liquids with different degrees of viscosity and other non-food liquids.

                      STANDARD FEATURES
                      ♦ 400-230V motor
                      ♦ Power 0.55—0.4 kW
                      ♦ Pressure 4 bar
                      ♦ Flow rate 23 H li/h
                      Optional: manual bypass .

                      Formular cerere ofertă

                        Impeller pumps KIESEL

                        Impeller pumps KIESEL

                        Kiesel impeller pumps are self-priming centrifugal pumps. They combine the features of a centrifugal pump and a discharge pump. They have a wide spectrum of use in the food, beer, milk, pharmaceutical and chemical industries as well as other branches of industry.

                        STANDARD FEATURES

                        • Self-priming
                        • All the parts in contact with product are made of stainless steel
                        • Fast disassembly
                        • Easy cleaning
                        • Compact design
                        • Up to 5 m self-priming
                        • Working pressure up to 5bar
                        • Liquid is pumped, trouble-free, with solid inclusions
                        • Bypass in cover
                        • With variable speeds
                        • With frequency converter
                        • Flow rate up to 30 m³, up to 4 bar

                        MODEL

                        Hourly output Installed power Articol nr.
                        IP 01 without by-pass from 1000 l/h 0,25 kw, 220 V, 4404
                        IP 02 without by-pass from 2500 l/h 230/400 V, 0,55 kW 14672
                        IP 02 with bypass from 2500 l/h 230/400 V, 0,55 kW 24221
                        IP 03 with Bypass from 5000 l/h 230/400 V, 0,75 kW 9184
                        IP 10 from 10.000 l/h 230/400 V, 1,5 kW 4425
                        IP 15 from 15.000 l/h 230/400 V, 2,2 kW 22755
                        IP 20 from 20.000 l/h 230/400 V, 3 kW 4431
                        IP 30 from 28.000 l/h 400 V, 5,5 kW 4432
                        Formular cerere ofertă

                          PISTON PUMPS

                          PISTON PUMPS

                          MANZINI SUPERBA pump range is designed for decanting liquids such as wines, vinegar, fruit juice and pulp including citrus fruits), de-stalked grapes, must, dregs, oil, sludge, and dense liquids in general, even containing suspended bodies (as for decanting purification sludge, see our high pressure pumps catalogue ), liqueurs, and industrial and drinking alcohol (flame-proof motors) etc.

                          CHARACTERISTICS:
                          Cover (in different materials) changeable. Capable for use with abrasive media.

                          • Dry running protection
                          • Self-priming pumps heights of 9.3 m below the pump level and maximum working pressure up to 4.5 bar.
                          • Possibility to empty hoses at the end of work without using water
                          • Low operating speed, does not damage and does not heat the transferred product
                          • Transferring liquids in general, even containing suspended bodies
                          • They are reliable and durable
                          • 2-speed motor controlled by completely independent circuits, both with protection against voltage drops or short circuits caused by mechanical overload
                          • The pump can be equipped with a remote control for remote start / stop.
                          Type Flow rate m3h Cylinder no. Speeds Motor kW Connection mm
                          SM 90 STANDARD 5 / 9 1 2 1,5/1,8 50
                          SM 120 STANDARD 6,5 / 12 1 2 3 / 4 50
                          SM 190 STANDARD 10 / 19 1 2 3 / 4 60
                          SM 240 STANDARD 13 / 25 1 2 3 / 4 70
                          SM 320 STANDARD 18 / 34 1 2 4,4 / 8 100
                          2C 330 STANDARD 18 / 34 2 2 4,4 / 8 70
                          2C 400 STANDARD 23 / 42 2 2 4,4 / 8 80
                          2C 490 STANDARD 26 / 50 2 2 4,4 / 8 80
                          2C 530 STANDARD 27 / 52 2 2 8,8 / 11 80
                          2C 630 STANDARD 32 / 62 2 2 8,8 / 11 100
                          2C 730 STANDARD 37 / 72 2 2 8,8 / 11 100
                          2C 830 STANDARD 42 / 81 2 2 8,8 / 11 100
                          2C 930 STANDARD 46 / 91 2 2 8,8 / 11 100
                          2C 1000/R5 STANDARD 49 / 96 2 2 8,8 / 11 100
                          SM 100 INOX 5,5 / 10 1 2 1,5 / 1,8 50
                          SM 120 INOX 6 / 11,5 1 2 3 / 4   50
                          SM 130 INOX 6,5 / 13 1  2 3 / 4 50
                          SM 240 INOX 10 / 19 1  2 3 / 4  60
                          SM 300 INOX 13 / 24 1 2 3 / 4 70
                          Formular cerere ofertă

                            Vincon

                            Vincon

                            Formular cerere ofertă

                              Cramele Halewood

                              Cramele Halewood

                              Formular cerere ofertă

                                Amigo Intercost

                                Amigo Intercost

                                Formular cerere ofertă

                                  Manholes

                                  Manholes

                                  Formular cerere ofertă

                                    Fittings and valves

                                    Fittings and valves

                                    Formular cerere ofertă

                                      Centrifugal pumps JESX-JEX

                                      Centrifugal pumps JESX-JEX

                                      Centrifugal pump EBARA seria JESX-JES

                                      JESX-JES models are self-priming centrifugal pumps made of AISI 304 stainless steel and used for drinking water supply systems, increasing the pressure in the water supply network, small irrigation systems, filling-emptying tanks or swimming pools and clean water pumping systems or slightly aggressive liquids.

                                      STANDARD FEATURES:
                                      Working max.pressure 6 bar
                                      Max. liquid temperature: 45 ° C
                                      Max. suction depth: 8 m
                                      Pump body and mechanical seal 's support flange of AISI 304 stainless steel
                                      Pump shaft of stainless steel AISI 304
                                      AISI 304 stainless steel turbine for the JEX range, made of fiberglass-reinforced noryl for the JESX range
                                      Mechanical seal of carbon/ceramic NBR

                                      TECHNICAL DATA
                                      Asynchronous electric motor with 2 poles, ventilated
                                      Insulation class F
                                      Protection IP54 (on request IP55)
                                      Tension:
                                      -monophasic 1: 230V /±10% 50Hz
                                      -triphasic 3: 230/400V /±10% 50Hz
                                      Single-phase electric motors are equipped with self-resetting thermal protection and starting condenser
                                      Thermal protection of three-phase motors will be installed by the user
                                      Suction diameter 1″ for JESX, 11/4″ for JEX
                                      Discharge diameter 1″

                                      Formular cerere ofertă

                                        Centrifugal pumps JES-JE

                                        Centrifugal pumps JES-JE

                                        Centrifugal pump EBARA serie JES-JE 

                                        Self-priming electric pump made entirely of stainless steel and suitable for drinking water supply systems, increasing the pressure in water supply network, small irrigation systems, filling-emptying tanks or swimming pools and other systems for pumping clean water or light liquids aggressive.

                                        CHARACTERISTICS:
                                        Cover (in different materials) changeable. Capable for use with abrasive media.

                                        Working max.pressure 6 bar
                                        Max. liquid temperature: 45 ° C
                                        Max. suction depth: 8 m
                                        Pump body and mechanical seal 's support flange of AISI 304 stainless steel
                                        Pump shaft of stainless steel AISI 304
                                        AISI 304 stainless steel turbine for JE range, made of fiberglass-reinforced Noryl for JES range
                                        Mechanical seal of carbon/ceramic NBR

                                        TECHNICAL DATA

                                        Asynchronous electric motor with 2 poles, ventilated
                                        Tension:
                                        -monophasic 1: 230V /±10% 50Hz
                                        -triphasic 3: 230/400V /±10% 50Hz
                                        Single-phase electric motors are equipped with self-resetting thermal protection and starting condenser
                                        Thermal protection of three-phase motors will be installed by the user
                                        Suction diameter 1″ for JES, 11/4″ for JE
                                        Discharge diameter 1″

                                        Formular cerere ofertă

                                          screw pump/ KIESEL B series

                                          screw pump/ KIESEL B series

                                          KIESEL pumps are suitable for a huge range of applications. They can solve any task to pump nearly all mediums continuously, softly, less of vibration and with equalized pressure. KIESEL pumps can be used in almost every industrial sector.

                                           

                                          CARACTERISTICS:
                                          • Optimized housing to avoid sediments
                                          • High quality surface, RA < 0,8 μm all elements that get in touch with the product
                                          • Material pairing, mechanical seals are adapted to their case of operation, ensure a hygienic shaft seal
                                          • All pumps have a pole reversal motor protection switch (2 speeds and 2 directions)
                                          • CIP- cleaning with a high flow rate ensures a residue-free and bacillus-free cleaning
                                          • Assembly and demounting without any special tools

                                          MODEL

                                          Productivity STANDARD FEATURES
                                          SP 05 B 02 4020/8160 l/h 400 V, 1.0/1.9 kw, 700/1400 U/min
                                          SP 05 B 03 1800-8700 l/h 400 V, 2.2 kw, 300-1500 U/min
                                          SP 05 B 05 840-8100 l/h 400 V, 2.2 kw, 900 U/min
                                          SP 06 B 01 9960 l/h 400 V, 2.2 kw, 700 U/min
                                          SP 06 B 02 9960/19380 l/h 400 V, 2.4/3.5 kw, 700/1400 U/min
                                          SP 06 B 03 1680-10200 l/h 400 V, 3.0 kw, 160-800 U/min
                                          SP 06 B 05 2040-16080 l/h 400 V, 3.0 kw, 900 U/min
                                          SP 06 B 06 2040-16080 l/h 400 V, 3.0 kw, 900 U/min
                                          SP 10 B 01 12780 l/h 400 V, 3.0 kw, 450 U/min
                                          SP 10 B 02 12780/25440 l/h 400 V, 3.7/4.4 kw, 450/900 U/min
                                          SP 10 B 03 4080-20820 l/h 400 V, 4.0 kw, 160-800 U/min
                                          SP 10 B 05 2700-20700 l/h 400 V, 4.0 kw, 450 U/min
                                          SP 10 B 06 2700-20700 l/h 400 V, 4.0 kw, 450 U/min
                                          SP 12 B 01 20000 l/h 400 V, 5.5 kw, 400 U/min
                                          SP 12 B 02 20220/39660 l/h 400 V, 4.8/6.0 kw, 400/800 U/min
                                          SP 12 B 03 5880-29760 l/h 400 V, 5.5 kw, 120-600 U/min
                                          SP 12 B 05 2940-34800 l/h 400 V, 5.5 kw, 320 U/min
                                          SP 12 B 06 2940-34800 l/h 400 V, 5.5 kw, 320 U/min
                                          SP 16 B 02 30300/58260 l/h 400 V, 6.4/7.8 kw, 250/500 U/min
                                          SP 16 B 06 7200-53680 l/h 400 V, 7.5 kw, 240 U/min
                                          Formular cerere ofertă

                                            screw pump/ KIESEL M series

                                            screw pump/ KIESEL M series

                                            Eccentric screw pumps model series M.
                                            This pump model series was developed especially for the beverage industry. The pumps are equally suitable for the promotion of mashes, as well as fruit wine, yeast, wine and fruit juices. Entire stone fruits, deberried and non-deberried grape mashes, yeast, draff, wine, cider, and concentrates are propelled along easily.

                                             

                                            CHARACTERISTICS:
                                            Cover (in different materials) changeable. Capable for use with abrasive media.

                                            • All pump parts that come into contact with the conveyed substance are made out of rust-free stainless steel 304/4301 or 316/4404
                                            • By-pass adjustment with angle valve (made of rust-proof stainless steel)
                                            • Screw thread connection according to DIN 405/11851
                                            • Undercarriage made of rust-proof stainless steel
                                            • Drives according to description with switch 230/400 V, 50 Hz

                                            MODEL

                                            Productivity STANDARD FEATURES
                                            SP 03 M01 max. 1000 l/h 230/400 V, 0.37 kw, 1400 U/min
                                            SP 04 M02 1080/2090 l/h 400 V, 0.7/1.1 kw, 700/1400 U/min
                                            SP 04 M03 485-1850 l/h 400 V, 1.1 kw, 280-1400 U/min
                                            SP 04 M05 400-1980 l/h 400 V, 0.75 kw, 900 U/min
                                            SP 045 M02 2200/4200 l/h 400 V, 0.7/1.1 kw, 700/1400 U/min
                                            SP 045 M03 940-4200 l/h 400 V, 1.1 kw, 280-1400 U/min
                                            SP 045 M04 490-2340/950-4460 l/h 400 V, 0.7/1.1 kw, 140-700/280-1400 U/min
                                            SP 045 M05 550-4200 l/h FU extern 400 V, 1.1 kw, 900 U/min
                                            SP 05 M02 4020/8160 l/h 400 V, 1.0/1.9 kw, 700/1400 U/min
                                            SP 05 M03 1800-8700 l/h 400 V, 2.2 kw, 280-1400 U/min
                                            SP 05 M04 840-4320/1620-8580 l/h 400 V, 1.0/1.9 kw, 140-700/280-1400 U/min
                                            SP 05 M05 840-8100 l/h FU extern 400 V, 2.2 kw, 900 U/min
                                            SP 05 M06 840-8100 l/h FU extern 400 V, 2.2 kw, 900 U/min
                                            SP 06 M02 9960/19380 l/h 400 V, 2.4/3.5 kw, 700/1400 U/min
                                            SP 06 M03 1680-10200 l/h 400 V, 3.0 kw, 160-800 U/min
                                            SP 06 M04 840-5160/1740-10260 l/h 400 V, 2.4/3.5 kw/ 80-400/160-800 U/min
                                            SP 06 M05 2040-16080 l/h FU extern 400 V, 3.0 kw, 900 U/min
                                            SP 06 M06 2040-16080 l/h FU extern 400 V, 3.0 kw, 900 U/min
                                            SP 10 M02 12780/25440 l/h 400 V, 3.7/4.4 kw, 450/900 U/min
                                            SP 10 M03 4080-20820 l/h 400 V, 4.0 kw, 160-800 U/min
                                            SP 10 M06 2700-20700 l/h FU extern 400 V, 4.0 kw, 450 U/min
                                            SP 12 M02 20220/39660 l/h 400 V, 4.8/6.0 kw, 400/800 U/min
                                            SP 12 M03 5880-29760 l/h 400 V, 5.5 kw, 120-600 U/min
                                            SP 12 M06 2940-34800 l/h FU extern 400 V, 5.5 kw, 320 U/min
                                            SP 16 M02 30300/58260 l/h 400 V, 6.4/7.8 kw, 250/500 U/min
                                            SP 16 M03 6900-49620 l/h 400 V, 7,5 kw, 80-400 U/min
                                            SP 16 M06 7200-53680 l/h FU extern 400 V, 7.5 kw, 250 U/min

                                            Formular cerere ofertă

                                              Screw pump/KIESEL SP FTF

                                              Screw pump/KIESEL SP FTF

                                              Eccentric screw pumps model series FTF Flat mash pumps are specially constructed for use under destemming machines, graters, or mills.
                                              Order a large feeding-screw and enclosed, wear-free joint.

                                              STANDARD FEATURES

                                              • Sunt Hollow rotors made of rust-proof stainless steel, vibration-free run
                                              • Stainless steel construction completely made of rust-proof stainless steel 1.4301 (AISI304)
                                              • Reverse switch, motor protection switch, control in sturdy switch box.
                                              • Promotion of de-berried, berried and de-juiced grape mashes

                                              MODEL

                                              Productivity STANDARD FEATURES
                                              SP 12 FTF 01 10.000 l/h> 400 V, 4.0 kw, 200 U/min
                                              SP 12 FTF 05 2.000-12.000 l/h FU extern 400 V, 4.0 kw, 50-200 U/min
                                              SP 16 FTF 01 15.000 l/h 400 V, 5.5 kw, 160 U/min
                                              SP 16 FTF 02 25.000 l/h 400 V, 5.5 kw, 250 U/min
                                              SP 16 FTF 03 5.000-25.000 l/h 400 V, 5.5 kw, 50-250 U/min
                                              SP 16 FTF 05 5.000-25.000 l/h FU extern 400 V, 5.5 kw, 50-250 U/min
                                              SP 20 FTF 01 50.000 l/h 400 V, 7.5 kw, 220 U/min
                                              SP 24 FTF 01 75.000 l/h 400 V, 11 kw, 200 U/min
                                              Formular cerere ofertă

                                                Screw pump / KIESEL FT

                                                Screw pump / KIESEL FT

                                                Eccentric screw pumps model series FT Pumps with a large rectangular funnel opening and feeding screw.

                                                The model series FT is designed to promote products with a high amount of solid pieces, mash, yeast and filter cake without any problem. This model series of pumps is used as a high consistency pump with a built in funnel and as a liquid pump with a closed funnel and screw thread connection.
                                                Advantages
                                                • Output up to 60 m³/h
                                                • Pressure level up to 24 bar
                                                • Mount on funnel, feeding screw, feeding strip, mixing tanks
                                                • Feeding screw diameter up to 300 mm
                                                • CIP designs
                                                • Paddle work as bridge breaker

                                                MODEL

                                                Productivity STANDARD FEATURES
                                                SP05FT01

                                                3.500l/h

                                                400V/1,5kW/700 U/min

                                                SP05FT05

                                                500-4.000 l/h/convertizor de frecventa

                                                400V/2,2kW/160-400U/min

                                                SP06FT01

                                                6.000l/h

                                                400V/2,2kW/500 U/min

                                                SP06FT05

                                                1.500-8.000 l/h/convertizor de frecventa

                                                400V/3,0kW/125-420U/min

                                                SP 10 FT 01

                                                10.000 l/h0

                                                400V / 3,0kW / 400 U/min

                                                SP 10 FT 06

                                                2.500 – 20.000 l/h

                                                400V / 5,5kW / 100-900 U/min

                                                SP 12 FT 01

                                                20.000 l/h

                                                400V / 5,5kW / 400 U/min

                                                SP 12 FT 06

                                                5.000 – 28.000 l/h

                                                400V / 5,5kW / 125-600 U/min

                                                SP 16 FT 01

                                                40.000 l/h

                                                400V / 7,5kW / 400 U/min

                                                SP 16 FT 06

                                                10.000 – 50.000

                                                400V / 7,5kW / 100-500 U/min

                                                Formular cerere ofertă

                                                  Hydraulic press

                                                  Hydraulic press

                                                  Hydraulic Press

                                                  STANDARD FEATURES::
                                                  Carbon steel frame on wheels
                                                  Electronic oleo-dynamic gearcase with AISI 304 stainless steel pressing plate
                                                  AISI 304 stainless steel juice collecting basin
                                                  AISI 304 stainless steel cage stand
                                                  Wooden cage with AISI 304 stainless steel bends
                                                  Electric panel 400/3/50

                                                  OPTIONAL:
                                                  AISI 304 stainless steel frame plating
                                                  Plexiglas splashboard
                                                  Polyethylene cage with AISI 304 stainless steel bends
                                                  AISI 304 stainless steel cage
                                                  Programmable PLC for pressing control

                                                   

                                                  TECHNICAL DATA 80 SUPER EXPORT
                                                  Installed power kW 1,1
                                                  Cage diameter mm 800
                                                  Cage height mm 950
                                                  Press dimensions mm 1900x1300x2750
                                                  Weight kg 880

                                                   

                                                  Formular cerere ofertă

                                                    DESTEMMER-CRUSHER TEMA-I

                                                    DESTEMMER-CRUSHER TEMA-I

                                                    DESTEMMER-CRUSHER TEMA-I

                                                    STANDARD FEATURES:
                                                    AISI 304 stainless steel frame on wheels
                                                    - AISI 304 stainless steel cylinder with 24 holes
                                                    - Juice extraction device
                                                    - Product feeding hopper
                                                    - Beating shaft with rods
                                                    - Speed controller for feeding auger, cylinder and shaft
                                                    Electric panel 400/3/50

                                                    OPTIONALS:
                                                    Must/crushed collecting basin with motorized auger

                                                    TECHNICAL DATA TEMA I
                                                    Motor power kW 1.8
                                                    Hourly output Ton/h 4-5
                                                    Dimensions mm 1800x700x1450
                                                    Weight kg 210

                                                     

                                                    Formular cerere ofertă

                                                      Destemmer-crusher TOP40/60/80/20

                                                      Destemmer-crusher TOP40/60/80/20

                                                      DESTEMMER-CRUSHER TOP 40-60-80-120

                                                      STANDARD FEATURES:
                                                      AISI 304 stainless steel frame
                                                      AISI 304 stainless steel cylinder with 30/25 or 25/22 holes
                                                      Juice extraction device
                                                      Crush / not crush device (with crusher)
                                                      Opening covers and removable beating shaft and cylinder
                                                      Beating shaft with adjustable rods
                                                      Motorized feeding auger
                                                      Electric panel 400/3/50

                                                      OPTIONALS:
                                                      Electronic speed controller for beating shaft and cylinder
                                                      Motorized crusher with adjustable rubber rollers complete of crush/not crush device
                                                      Stainless steel splash guard
                                                      Must/crushed collecting basin with motorized auger
                                                      Cylinder washing device
                                                      Stalks collecting hopper
                                                      Electropolished beating shaft and cylinder

                                                      TECHNICAL DATA Top 40 Top 60 Top 80 Top 120
                                                      Motor power destalker

                                                      kW

                                                      5.5 7.5 9.2

                                                      15

                                                      Motor power crushing unit

                                                      kW

                                                      2.2 3 5.5

                                                      7.5

                                                      Motor power auger

                                                      kW

                                                      1.1 1.1 1.5

                                                      3

                                                      Hourly output

                                                      Ton/h

                                                      30/40 50/60 70/80

                                                      100/120

                                                      Dimensions

                                                      mm

                                                      3520x1000x2050 3900x1150x2250 4150x1360x2800

                                                      5000x1800x3200

                                                      Weight

                                                      kg

                                                      1310 1650 2200

                                                      2700

                                                      Formular cerere ofertă

                                                        Palletizable tank

                                                        Palletizable tank

                                                        Palletizable and super-stackable tank

                                                        Made of stainless steel is a universal tank designed for handling with pallet truck and/or forklift. The structure built around tank allows overlap of several containers of the same typology, thus managing various types of products and optimizing available spaces.

                                                        STANDARD FEATURES:

                                                        • Upper manhole
                                                        • Air vent valve
                                                        • Sample valve
                                                        • Partial inlet/outlet valve
                                                        • Total outlet valve
                                                        • Structure from stainless steel around the tank

                                                        OPTIONAL:

                                                        • Level indicator
                                                        • Thermometer
                                                        • Nitrogen dispenser
                                                        • Thermal jacket
                                                        • Manhole by side
                                                        Formular cerere ofertă