SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH HYDRAULICS IN AISI 304 CD series made by EBARA, are surface centrifugal electric pumps entirely made of AISI 304 stainless steel. CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general. The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

Centrifugal pump EBARA seria JESX-JES

JESX-JES models are self-priming centrifugal pumps made of AISI 304 stainless steel and used for drinking water supply systems, increasing the pressure in the water supply network, small irrigation systems, filling-emptying tanks or swimming pools and clean water pumping systems or slightly aggressive liquids.

STANDARD FEATURES:
Working max.pressure 6 bar
Max. liquid temperature: 45 ° C
Max. suction depth: 8 m
Pump body and mechanical seal 's support flange of AISI 304 stainless steel
Pump shaft of stainless steel AISI 304
AISI 304 stainless steel turbine for the JEX range, made of fiberglass-reinforced noryl for the JESX range
Mechanical seal of carbon/ceramic NBR

TECHNICAL DATA
Asynchronous electric motor with 2 poles, ventilated
Insulation class F
Protection IP54 (on request IP55)
Tension:
-monophasic 1: 230V /±10% 50Hz
-triphasic 3: 230/400V /±10% 50Hz
Single-phase electric motors are equipped with self-resetting thermal protection and starting condenser
Thermal protection of three-phase motors will be installed by the user
Suction diameter 1″ for JESX, 11/4″ for JEX
Discharge diameter 1″